Linker error after converting project from v4.5 to v5.0

View previous topic View next topic Go down

Linker error after converting project from v4.5 to v5.0

Post  GoldenMaple on Fri Aug 22, 2008 7:35 pm

Hi there,

After converting my project from v4.5 to v5.0, I got another linker error. Looking into ldf file, I observed that there was a cross (x) symbol appearing at section Code_Space_Name, which has never been seen in v4.5. Please advise.

GoldenMaple

Posts : 11
Join date : 2008-08-22

View user profile

Back to top Go down

Re: Linker error after converting project from v4.5 to v5.0

Post  lzmind on Fri Aug 22, 2008 7:45 pm

There is a little difference in ldf structure between v4.5 and v5.0, e.g., section seg_pmco is under seg_int_code in v5.0, which was in parallel with it. Section Code_Space_Name seems new in v5.0, it was defined in the library.

My advice would be this, back up the original ldf, then delete it from the project. Create a new ldf with Tools->Expert Linker tool, then modify the new ldf as necessary with the reference to your original one. Hope this helps.

lzmind

Posts : 18
Join date : 2008-08-20

View user profile

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum