http://embeddedstudio.forumotion.net/analog-devices-visualdsp-and-dsp-f6/-t1.htm This forum contains topics about Analog Devices DSP and development tool VisualDSP++ IDE. Tue, 19 May 2009 06:54:06 GMT 10 http://illiweb.com/fa/prosilver/site_logo.gif http://embeddedstudio.forumotion.net/analog-devices-visualdsp-and-dsp-f6/-t1.htm http://embeddedstudio.forumotion.net/analog-devices-visualdsp-and-dsp-f6/booting-a-second-program-t13.htm calvinium Hi, I've been working through your article on booting one application from an alternative running one and am encountering some roadblocks. I was wondering if you could point me in the right direction. I erased the flash, and compiled and load the first application via JTAG. I ran the first application without flashing the second and expect it to erase itself, but in fact after reset, it restarted the first application again. I have made the following assumptions about the process: 1. ... Analog Devices VisualDSP++ and DSP Tue, 19 May 2009 06:54:06 GMT http://embeddedstudio.forumotion.net/analog-devices-visualdsp-and-dsp-f6/booting-a-second-program-t13.htm#30 http://embeddedstudio.forumotion.net/analog-devices-visualdsp-and-dsp-f6/booting-a-second-program-t13.htm http://embeddedstudio.forumotion.net/analog-devices-visualdsp-and-dsp-f6/problem-of-ldr-file-without-the-use-of-the-default-kernel-t12.htm lyh8 In my SHARC application created in VisualDSP++ v5.0, I found a problem in my ldr file when "Use default kernel" option was unchecked in the Project Option window. The problem was the ldr image did not contain an Interrupt Vector Table at the end. Because of that, the ldr image failed to run after being loaded from flash to on-chip RAM. Can you please advise why? Thanks a lot. Analog Devices VisualDSP++ and DSP Thu, 02 Apr 2009 01:48:31 GMT http://embeddedstudio.forumotion.net/analog-devices-visualdsp-and-dsp-f6/problem-of-ldr-file-without-the-use-of-the-default-kernel-t12.htm#28 http://embeddedstudio.forumotion.net/analog-devices-visualdsp-and-dsp-f6/problem-of-ldr-file-without-the-use-of-the-default-kernel-t12.htm http://embeddedstudio.forumotion.net/analog-devices-visualdsp-and-dsp-f6/linker-error-after-converting-project-from-v45-to-v50-t4.htm GoldenMaple
After converting my project from v4.5 to v5.0, I got another linker error. Looking into ldf file, I observed that there was a cross (x) symbol appearing at section Code_Space_Name, which has never been seen in v4.5. Please advise.]]> Analog Devices VisualDSP++ and DSP Sat, 23 Aug 2008 01:35:20 GMT http://embeddedstudio.forumotion.net/analog-devices-visualdsp-and-dsp-f6/linker-error-after-converting-project-from-v45-to-v50-t4.htm#6 http://embeddedstudio.forumotion.net/analog-devices-visualdsp-and-dsp-f6/linker-error-after-converting-project-from-v45-to-v50-t4.htm http://embeddedstudio.forumotion.net/analog-devices-visualdsp-and-dsp-f6/warning-message-after-converting-project-of-v45-to-v50-t3.htm GoldenMaple
After upgrading VisualDSP++ from v4.5 to v5.0 with Update 3, I converted my project that was built with v4.5 to v5.0, every time after building, there was a warning message something like

Trying to load an executable built for 0.0 silicon to a 0.1 silicon target. Continue? Yes (button) or No (button)

Even though it is not a big deal but do you know how to eliminate that message? Thanks a lot.]]> Analog Devices VisualDSP++ and DSP Sat, 23 Aug 2008 00:38:29 GMT http://embeddedstudio.forumotion.net/analog-devices-visualdsp-and-dsp-f6/warning-message-after-converting-project-of-v45-to-v50-t3.htm#3 http://embeddedstudio.forumotion.net/analog-devices-visualdsp-and-dsp-f6/warning-message-after-converting-project-of-v45-to-v50-t3.htm